Steel Stud And Track

STEEL STUD AND TRACK FOR DRYWALL PARTITIONS

TAKE ADVANTAGE OF THE SAVINGS IN TIME AND MONEY OFFERED BY STEEL STUD CONSTRUCTION.

A FEW OF THE MANY BENEFITS ARE:

METRIC/IMPERIAL CONVERSION TABLE

INTERIOR NON-COMPOSITE LIMITING WALL HEIGHT TABLE

Notes:

Studs are 0.0179 in. base steel thickness.
Limiting heights are based on continuous support of each flange over the full height of the stud.
Heights based on steel properties only,calculated in accordance with CSA-S136-2002.

STUD DESIGNATION	SPACING o.c.(in.)	5 psf			7.5 psf			10 psf
STUD DESIGNATION	SPACING o.c.(in.)	L/120	L/240	L/360	L/120	L/240	L/360	L/120	1L/240	L/360
250S125-18	12	12-6	10-6	9-2	10-2	9-2	8-0	8-10	8-4	7-4
	16	10-10	9-6	8-4	8-10	8-4	7-4	7-7	7-7	6-7
	24	8-10	8-4	7-4	7-2	7-2	6-4	6-2	6-2	5-10
360S125-18	12	15'-1"	13'-7"	11'-11"	12'-5"	11'-11"	10'-5"	10'-8"	10'-8"	9'-5"
	24	13'-1"	12'-5"	10'-10"	10'-8"	10'-8"	9'-5"	9'-4"	9'-4"	8'-7"
	24	10'-8"	10'-8"	9'-5"	8'-8"	8'-8"	8'-4"	7'-7"	7'-7"	7'-6"
NOTE: 600S125-18 walls must be constructed with full sheathing, see note 2 below and use corresponding Composite Table.

INTERIOR COMPOSITE LIMITING WALL HEIGHT TABLE

Notes:

Studs are 0.0179 in. base steel thickness.
Composite wall sheathed both sides full height with 1/2" gypsum wallboard.
Sheathing attached with #6 screws minimum at 12" o.c. maximum.
Maximum heights are also applicable to walls sheathed with gypsum board greater than 1/2 in. thick and multiple layers of gypsum board.

Contact Us: